Rodney Ebersole

Forum Replies Created

Viewing 15 posts - 166 through 180 (of 573 total)
  • Author
    Posts
  • in reply to: Time to Stir Things UP!!!! #62377
    Rodney Ebersole
    Participant

    Rich, you are demanding, at least you don’t have to be a star to be in my show. Mike always seems to have his high beams on. You know Craig did get hurt in is pursuit towards happiness which ended his summer season and may have affected his winter Curling competitions. Nice to see you posting here Craig, give us a link to your Karting Commune please.

    in reply to: Time to Stir Things UP!!!! #62373
    Rodney Ebersole
    Participant

    Rich, haven’t you heard. Rocky’s Auto got a 1 billion dollar ear mark from Obomer to buy all the go kart tracks in Colorado. The EKR (equal karting rights) plan is to eliminate high cost to every one by only allowing pre Bush era karts with maximum 8 HP imported clone motors. You can turn in your obsolete equipment to join in on the action and receive a one time $500.00 coupon which can get you up and running in this new exciting plan to even the playing field. There will be no pit fees and no trailers allowed, free bungee cords are available at sign up at which time each racer is given one new tire, 1/2 gallon of spec E85 fuel and a 3 foot club to bash your way to the winners circle. Transponders are illegal and need to be replaced with power saving sun dials. There will be more details revealed about this great karting stimulus plan, but we must hurry to get it going before we loose everyone that supports kart racing.
    If it creates even one new karter the EKR will be deamed worthy for all and mandated nation wide.
    So get on board and bring your obsolete equipment to me to receive your coupon today! This weekend Get Bent Racing and Black Flag Racing is putting on a pork sandwich party for the EKR to celebrate the end of karters with an advantage over others. :king

    in reply to: Time to Stir Things UP!!!! #62365
    Rodney Ebersole
    Participant

    How long of a club can you use in club racing? 💡

    in reply to: Dash for cash #62453
    Rodney Ebersole
    Participant

    I could use some competiton on the ice rink. Jay’s been too easy to beat with his little Biland.

    in reply to: Cheap Parts by Andy Seeseman #62417
    Rodney Ebersole
    Participant

    Yep , But why does it seem most in “the business” order from http://www.Partsfromanothercountry.com ?

    in reply to: Complete Summer Race Schedule #61677
    Rodney Ebersole
    Participant

    Jason, You did so good now your in charge.. See if you can add Rotax Max qualifing races and CRE races to your list.

    in reply to: Forum Annoucement – Please Read! #62266
    Rodney Ebersole
    Participant

    Thanks Angie, it worked!

    in reply to: Forum Annoucement – Please Read! #62268
    Rodney Ebersole
    Participant

    My control panel is out of my control too. I hope changing our user name doesn’t effect, join dates and post counts. anyway if you can change it my name is
    Rodney Ebersole.
    Thanks Angie

    in reply to: Toe Alignment setup tools to borrow? #62221
    Rodney Ebersole
    Participant

    I would be glad to help ya get it done at my shop. 46201 Hwy. 285 303-838-1941

    in reply to: The Track at Centennial announces "Hard Card" #62094
    Rodney Ebersole
    Participant

    I think the Masters class only get stiff cards Rich.

    in reply to: TAG WORLD CHAMPIONSHIP EVENT INFO… #61904
    Rodney Ebersole
    Participant

    Thanks Stacey,
    I just need to know if I can buy a membership at the track?

    in reply to: TAG WORLD CHAMPIONSHIP EVENT INFO… #61901
    Rodney Ebersole
    Participant

    Stacey,
    I have been using Ms98 and motul 800 in our CSC series @ 32:1 and I am pretty sure it was allowed in Rotax’s last year at the World event.
    I think we have to have a Tag USA membership, will we be able to purchase that there? Is our CSC races considered qualifications to race in the Tag Worlds?
    I just didn’t see the CSC series being listed as one of the qualifying series used for participation.

    in reply to: Is this bent??? #61866
    Rodney Ebersole
    Participant

    We’re back to the “Depends” Rich. The more I work with it the more things I find to check. Like they say time is money. So if somebody is in a hurry I can take less time.

    in reply to: White Fluid coming out of gear case?!?!!? #61882
    Rodney Ebersole
    Participant

    Tony, That’s better than not putting any in oil in it, plus now you have tested the vent and know it is working. 😛

    in reply to: Is this bent??? #61864
    Rodney Ebersole
    Participant

    Rich, I can give you the reason why I built it then you can judge if it is something sort of special or not.

    After last season my chassis had been well used, dear whistles on the bottom, whacked and bent from Vegas, which is also where I saw a chassis table that inspired me to build this one. So if I wanted to race this year I needed a new chassis. In 2007 a new GP8 frame ran $1700.00 . I found another bent frame “cheep” that wasn’t worn on the bottom but now I needed to be able to measure and straighten it for it to be of any use. After many long winter days working in my shop I came up with my jig that allows me to check and straighten my chassis. Then Ricky applied the space age paint on the contraption.
    There is no reason you need to use it if you have never ran off coarse or have never hit anything with your kart and know that your kart came as straight as you want it to be from the factory. But if you do wonder if the front and rear axles are true and square, your axle is in an even plain with the frame, if your frame is on a even plain with the proper rake, your spindles are at equal heights, your bearing carriers are square, if neutral pills are neutral, this space age contraption can not only see if it is but it can do something about it. Then again if I decide I don’t want everything straight and square I also have the ability to do that too and change it back.
    Well Rich, How did I do? I’m not much of a PR guy and I am still learning how to make money so any advice would be great.
    Are you planning on going to “The Track” next week? If so stop by and see what you think.

Viewing 15 posts - 166 through 180 (of 573 total)