Home › Forums › General Discussion › what is this?
- This topic has 11 replies, 7 voices, and was last updated 15 years, 6 months ago by
Mike Jansen.
- AuthorPosts
- September 20, 2010 at 6:47 pm #64335
Doug Welch
ParticipantThat’s a Motori piston with a bit of upper end bearing cage mixed in for flavor.
September 20, 2010 at 7:16 pm #64336Angel Ramirez
Participantthat one looks like my rotax after only 2 hours on it.
September 20, 2010 at 8:48 pm #64337Terry Von Tilius
ParticipantLooks more like my last Briggs Modified motor.
September 21, 2010 at 2:05 am #64332gunter desanti
ParticipantActually it is an x-ray of Terrys knee. Just kiddin Terry, hope your doing O.K. hopefully see you at PPKRC in Oct.
Heres two more,three engines same week-end.
Oh well at least I still have a Vampire, maybe I can grenade that this week end.
NOBODY DOES IT BETTER :loony:September 21, 2010 at 2:23 am #64338Rick Schmidt
ParticipantLeaning on the timing a little Gunter?
September 21, 2010 at 2:57 am #64339gunter desanti
ParticipantHi Rick,
No diagnosis for the pile of shrapnel.
#2 with chunk out of back of piston, due to cylinder base gasket failure, flooding engine with coolant.
#3 hole in piston, carb flange not tightened. I would agree running on lean side. :bangGunter
September 21, 2010 at 3:44 pm #64333Mike Jansen
ParticipantGunther, why are you using RV as a gasket when you should be using a paper gasket.
Just asking…
September 21, 2010 at 4:54 pm #64334Terry Von Tilius
Participant@gunter desanti wrote:
Actually it is an x-ray of Terrys knee. Just kiddin Terry, hope your doing O.K. hopefully see you at PPKRC in Oct.
Gunter,
How did you guess? That’s what my knee feels like. Surgery is on Thursday… Yes, it’s a mess. I’ll be OK. I won’t be able to make the race at PPIR in Oct. I’ll be out of town. Thanks for the good wishes.
September 22, 2010 at 1:45 am #64340Dave Innes
ParticipantGunter,
I know. It used to be money in your bank account. 🙂
Drop me a note I have a question for you. [email protected]
Dave
September 22, 2010 at 3:14 am #64341gunter desanti
ParticipantMike,
Seemed like a good idea at the time to use silicone gasket, if you dont have paper gasket.
As the only other Motori owner in CO. you should be able to relate to having to deal with the sole importer of Motori. “It’ll cost you an arm and a leg and I might get it to you in a month or two”.Gunter
September 22, 2010 at 4:20 pm #64342Mike Jansen
ParticipantG,
With the proverbial milk spilt I’ll tell you this: Butcher paper works well, I’ve made 6 of them as back ups.
Or, you could have emailed me and asked if I have any spares (i have several in various different thicknesses)
- AuthorPosts
- You must be logged in to reply to this topic.