Tech Issue – CRG shifter kart clutch and cable

Home Forums General Discussion Tech Issue – CRG shifter kart clutch and cable

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #41257
    BoulderG
    Participant

    Hi –
    The clutch on my 1999 CRG Daytona Heron is very stiff. It does not move smoothly – lots of stiction and jerkiness.

    I thought of changing the clutch cable, using a teflon-lined bicycle cable, and seeing what I could do about the routing to make sure it is unkinked, gentle turn radii, etc.

    Anything else to do?
    Any comments or suggestions here?

    I expect the clutch to be pretty on/off, but it’s hard to move the shift lever by the wheel.

    When I’m World Karting Champion, I’ll owe it all to everyone on this list…
    Thanks!
    BoulderG

    #52449
    Anonymous
    Inactive

    :cheers:
    Check the clutch basket for gooving and anything that would cause the plates to hang up

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.