- This topic has 20 replies, 10 voices, and was last updated 19 years, 8 months ago by
.
- Posts
NO POP, look out Masters Boys here I come.
Special big thanks to Doug Welsh, well done old man.
Next stop Billet to get some more????????Jay
A big thanks from the entire Colorado Karting community Doug! Now Jay can move on.
And I already started the party Jay.
Basically it was an air leak between the case halves. The gasket surface between the cases was way out of flat due to a previous re-build. Aslo, an ear was broken off by the stud. Some one had used a screw driver in the slot by the clutch and had broken the case. We welded the pieces back in, then stoned all the major gasket surfaces flat. Also put a new power valve in it.
Now if I could just get Jay to use the Rotax jetting! :loony:
Lets guess who worked on that Rotax previously! I know who is getting my vote.
Joe Marshall
Rotax / MaranelloP.S. Doug, Thanks for all your help! It’s amazing how much better these rotax engines run with the piston in the correct way.
- You must be logged in to reply to this topic.