Stock Moto Setup

Home Forums General Discussion Stock Moto Setup

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #41318

    hello everyone,

    I need a starting point for setting up my stocker for the 3 existing tracks involved in the CSC – IMI / GJ / Bandamier

    Gear Ratio / Jet / Needle position

    really appreciate your help, Thanks !


    p.s. actually went and looked at the centennial track – looks great! I like the different levels, straights look kind of narrow, 3 off-camber corners!?!

    Doug Welch

    Bandi, 15/27 is a fair starting point. IMI and GJ, 17/26., maybe a 27 rear in GJ. The Track, who knows? Jetting, have a selection from 155 to 176. Most of the time you will be around 160 to 168. Needle, stick it in #2 and fa’gatta’bout it.

    If you want to be safe, run a 168, a little fat but it won’t hurt it. Just drive the crap out of it. Change the trany oil once and a while. At the end of the year, send it for freshing.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.