- This topic has 5 replies, 3 voices, and was last updated 17 years, 9 months ago by
.
Viewing 6 posts - 1 through 6 (of 6 total)
- Posts
I understand that there are various type of slide that can be used in the Rotax FR125 (non Rotax Challenge series) engine. The stock slide is a #40 does anyone no any advantages in moving up to a larger or down to a smaller slide and does the larger the number also mean a larger air volume?
F.Y.I. Rotax Technical Regulations Section 3 Carburettor 15.6
The carburettor slide must show with size “40” in casting and the bottom end of the slide must show cast surface.
he is asking for a non rotax challenge set up,wich is open becuse the slide is part of jetting under TAG RULES.
Yes, not running the rotax challenge. I was talking to someone at IMI last Sunday, and they made some interesting suggestions was that you Mr. ROTAXIAN?
Viewing 6 posts - 1 through 6 (of 6 total)
- You must be logged in to reply to this topic.