Home › Forums › General Discussion › RMC lap times for CRE
- This topic has 6 replies, 5 voices, and was last updated 21 years, 1 month ago by
Michael Hurley.
- AuthorPosts
- April 4, 2005 at 5:55 pm #50328
Mike Jansen
ParticipantFigure 8 configuration
33 second times for international class
good luck!:bs:
April 4, 2005 at 11:13 pm #50329Anonymous
InactiveTom,
Micheal Hurley could give you a better idea on masters times but if I remember right the faster guys were in the mid to high 41’s last year. From what I hear the Mojos are going to be a bit slower, I have not tested with them yet so your guess is as good as mine. Most International guys are in the mid 40’s pretty consistantly on B-stones. I would expect times to be even slower this weekend however, we were down there a few weekends ago and the track was VERY green.
April 5, 2005 at 12:06 am #50330Tom Dennin
ParticipantDane,
I was down there on Sunday testing with the MOJO’s and my times were not anywhere near Mike’s who was there.
Tom
April 5, 2005 at 4:00 pm #50331Michael Hurley
ParticipantBut Tom, you were on those rock hard MOJOs and I was on B’stones. I would have been right with you pointing backwards if I was on MOJOs.
April 5, 2005 at 4:29 pm #50332Doug Welch
ParticipantAny idea for gearing for the Rotax? We’ve never run it there and need a starting point.
April 5, 2005 at 5:18 pm #50333Michael Hurley
ParticipantDoug,
I’ve been running 13’84. I know some guys want a little more outa the corners so they have been dropin’ to a 12 drive gear.
All I can tell you is what I’ve been doing.Michael
- AuthorPosts
- You must be logged in to reply to this topic.