Pro125 Crash

Home Forums General Discussion Pro125 Crash

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #40386
    Anonymous
    Inactive

    Does anyone happen to know who I vaulted over during the beginning of the Pro125 race? Are they OK?

    Doug Schuler

    #47309
    Mike Frank
    Participant

    Doug,

    It was not me, I was Scarberried off at turn 2!!!!!! Long race to be taken out on lap 5!!!!! After that I was too busy trying to catch up and did not see what happened to you. Congrats on the new track record though 8)

    #47310
    Anonymous
    Inactive

    Mike:
    Thats a phrase we hear way too many times. At least this time he also took himself out.

    #47311
    Doug Welch
    Participant

    The rear of our kart was tore up pretty bad. We lost a wheel, axle, tire, side pod, and a rad mount. Greg saw the trouble outside and went inside and made a clean pass only to have Perme come down on him and take his kart apart. We were just a victim in the whole thing. Its a shame, Greg had a good run going. Since he started dead last in the main, his run up through the field was fun to watch. He got as high as 4th before the handling went away and the motor got soft. It just ate too much IMI dust!

    To give you an idea how close the field was, I was looking at the fast times for the main event. .7 of a second covered the first 12 karts! For several guys, only thousands of a second was the difference. All of them were running low to mid 52 second range. Fast lap went to Lee Bradford on lap 12. Good job Lee. There is still life in the old moto yet! :cheers:

    #47312
    Anonymous
    Inactive

    T. Rudolph was also hit from the rear, he stated “I looked up and saw the floor pan of an airborn kart”, his new icc pavasi sucked up that IMI dust as well ! Hopefully he can get it repaired prior to the expo in Springs ! :idn:

    #47313
    Anonymous
    Inactive

    wow! i cant belive 12 karts all that close together. i wish i was at the race to check out that great comp!

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.