- This topic has 1 reply, 2 voices, and was last updated 21 years, 10 months ago by
.
Viewing 1 post (of 1 total)
- Posts
the way i did it was, there should be 2 slots on each side of the bearing, on top where the cinch bolt goes throgh, and on the bottom of that, try to push the bearing so it becomes straghit outwards on the cassete, then get the bearing into those slots and pull it out, make sure to loosen the cinch bolts
you do need the cassets out of the chassis to do this
Viewing 1 post (of 1 total)
- You must be logged in to reply to this topic.