- This topic has 2 replies, 2 voices, and was last updated 11 years, 4 months ago by
.
- Posts
Brett, I can order you the one Sodi makes.
Although you may want to check this out first. You need a spanner/castle wrench to take apart a door handle. I was able to use my Sodi one to take the door handle apart, it fit 100% perfect, so maybe the wrench they make for door handles will take off the Sodi nut!!
I know Birel also uses a castle type nut just like the Sodi, theirs is a much different size than the Sodi one so it will not work.
My Sodi tool has a 27mm ID, 32mm OD. It has 4 pins on it that are 3mm wide.
I’ll keep that in mind. Spanner sockets can be expensive. I stopped by HF and picked up a $3.00 15/16 socket and milled it out. I’ll test it tomorrow night. I came up with the same measurements, 27mm ID with 3mm pins. I was searching the net and couldn’t find anything with the proper pin size or OD.
Thanks!
- You must be logged in to reply to this topic.