Chassis/Brake identification help needed (pics inside)

Home Forums General Discussion Chassis/Brake identification help needed (pics inside)

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #82503
    Daniel Lopez
    Moderator

    Can anyone help me identify this chassis? I am new to this stuff and my internet searches are coming up fruitless. I did find this nifty guide on identifying Birel Chassis but it is not helping me much. The photo is from the front center bar while the guide says I should find this information on the rear cross bar or bearing carrier. I didn’t find anything in either location (although, I will admit that the kart was on the ground and I couldn’t quite get under the full rear cross bar). My true goal is to find a brake rebuild kit as the RF brake is leaking from the piston seal. See attached pics, any assistance is appreciated!

    Link to chassis identification guide: http://www.mrpmotorsport.com/technical/howto-gobirel-chassis.pdf

    Badge on chassis:

    Serial/Chassis identifcation

    Brake (I have a few more random photos if that helps in identifying which brakes/brake rebuild kit I need):

     

    • This topic was modified 6 years, 5 months ago by Daniel Lopez. Reason: added tags
    #83819
    JB Marston
    Participant

    You might want to ask the question on a Birel page on Facebook. There is one for pre-2000 and at least one more for newer karts.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.