Caster?

Home Forums LO206 Caster?

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #44412
    Richard Gordon
    Participant

    Would it be benificial to add caster to help the kart turn with the Duros? Figured it would help lift the inside rear tire. Seems like it would help the kart rotate and not bind in tight turns. Will it kill corner exit speed on high speed turns?

    #67415
    Rodney Ebersole
    Participant

    Richard, You will never know unless you try it. You all ready induced more caster by widening the front and narrowing the rear and liked the results, right?
    Have you tried adding seat struts to the rear bearing carriers, or and raising the VCG with the seat and or weight placement yet? You can always go back.

    #67416
    Richard Gordon
    Participant

    Did add some weight up high on the back of the seat. Working on putting some braces on. Trying to find something to work on the right rear. No 3rd bearing, so have to go between the chain and exhaust. Not a lot of room in there and the bend will have to be just right.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.