- This topic has 6 replies, 3 voices, and was last updated 16 years, 6 months ago by
.
- Posts
Done this before….handling didn’t turn out so well for me considering I botched how far back to put the seat 🙁
Anyone near 1-25 araphaoe/belleview maybe willing to help a brutha out mounting a seat?
Thanks! :rotate:
by Chuck D on Fri 05 16, 2008 8:09 am
Done this before….handling didn’t turn out so well for me considering I botched how far back to put the seat
At least you had it facing the right direction Chuck.
Rick
@Rick Schmidt wrote:
by Chuck D on Fri 05 16, 2008 8:09 am
Done this before….handling didn’t turn out so well for me considering I botched how far back to put the seat
At least you had it facing the right direction Chuck.
Rick
Imagine if i didnt! haha.
Yea I have the specs for the R30 chassis ( I have another Easykart).
It is a Ribtect seat….so i think there shouldnt be any difference than other seats correct?
Thanks Rick!
Some of the ribtec seats are deeper than the euro seats (does it wrap around) that come with the karts.
If you have access to a standard seat you can measure for the differences, then follow your recommended set up dimensions.
So you and Kirk Deason are going to be running in packs huh? The other “Hard Kart” out there.
Glad to see you getting back into the seat. Some of your car experience will help your kart driving for sure.
Rick
Chuck will be the Team HARDKart rep for the TaG seniors and I’ll be holding up my end in TaG Fat. Once I got my seat mounted correctly it was like I had a whole new kart, it actually TURNED instead of plowing the front. That only took me 2 and 1/2 seasons to figure out.
- You must be logged in to reply to this topic.