- This topic has 2 replies, 2 voices, and was last updated 10 years, 1 month ago by
adam_kasick.
- AuthorPosts
- April 22, 2016 at 7:10 am #67716
jdavis-403
Participant@adam_kasick wrote:
for those looking for a starting set-up at action, here’s what i ran today. Chad and I had a good practice and ran almost identical setup’s.
New-Unser racing prepared CompKart Covert 3.0-4
Off the shelf motor… broke in for 10 mins on the stand.
385ish weight18/68 gear
16psi front
17 psi rear (right rear probably needs to be .5-1lb less as it’s all left turns and it heats up quickly)
hiliard flame clutch… 2 black / 2 white
position 4 on needle clip
idle air mix screw 1 1/4and here’s a crappy video from my phone again… (not true braking/lift points as I only had one hand to drive)
track is bumpy and has lots of rocks that get drug out on it.. highly recommend skid plates and sprocket guide as throwing chains will be problematic.https://www.youtube.com/watch?v=adkkRIEXmKw
if anyone wants to know anything about my setup.. you can ask, or come see the kart yourself on sunday!
:green
NICE! Thank you sir!!! I will add this stuff to the other thread as well. In regards to lap times. What were you running? Also on the tires I assume these were Duros. That is a low pressure. I may have to try that out!
April 22, 2016 at 1:57 pm #67717adam_kasick
Participantduro’s, yes… lap times were 49.5ish….
- AuthorPosts
- You must be logged in to reply to this topic.