- This topic has 2 replies, 3 voices, and was last updated 6 years, 10 months ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
- Posts
i have a 50mm otk type n axle I swapped to lo206 and it dose not have a spot for a key to mount the sproket. Is there a machine shop that can cut it in or do I need to buy a new one
If the axle is new we can swap you at for a shifter axle which is keyed for Briggs. If you want to get it machined IMI can do it on site (ask for Ron) or I can take care of it for you, just takes a couple days as I do the work off-site.
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.