- This topic has 4 replies, 1 voice, and was last updated 21 years, 7 months ago by
.
- Posts
Scott,
Dave Gallegor has a list of care and feeding of the Rotax that should be helpfull.
My kart is coming in 2 wks—-hurray!!!!!!!!!! :sun:
Hi Scott,
Dave G’s site is here
http://www.g-rpm.com/
download the manuals if you don’t have them already. Browse the site, lots of good rotax info.
At the track, ask a Rotax driver what your main jet and needle setting should be for Sat conditions. I’ll be there, with my camera, but not my kart, but I know of 2 rotax guys that will be there.
off the top of my head -Bring – carb cleaner, wire ties, chain lube, something to clean your chassis so inspectiion is easier, like simple green or 409 cleaner, hand cleaner, rags, tire guage, tools, safety wire and pliers, spare spark plugs, more rags, water for yourself. And if you have differant sprockets, bring those too. On Fri charge your battery, make sure exhaust pipe is sealed to the header, ck all nuts and bolts, ck brakes, drain any old fuel, ck radiator level, and ck that all lines,wires cables etc are wire tied securley. see you there.
hth, Richardokay great! thanks a lot i really appreciate it becasue i dont think that duff can come down with me tommorow so it makes it harder for the newbies like us..lol
hopefully ill be there unless the weather is real bad or if i get really sick so most likely ill be out there!
thanksthanks to everyone who helped me out today! i had a heckuva time and shaved off 10 seconds from the begining to the end…my fastest was actually slow compareed to tons of guys but it was a bout a 59. second run
lol oh well..getting bettter…. 🙂
- You must be logged in to reply to this topic.