- This topic has 2 replies, 2 voices, and was last updated 17 years, 2 months ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
- Posts
Is the Rotax 125’s main jet position considered an adjustment, i.e., will I see a performance change if I back it out a turn, half a turn, etc?
The main jet can not be adjusted. It can only be changed from one size to another. At this altitude, your jet sizes will be between 150 and 158. The main jet is located under the 19mm bolt on the bottom of the carb.
Thanks. I didn’t think you could adjust it, just change sizes.
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.