Home › Forums › General Discussion › CSC Race
- This topic has 5 replies, 3 voices, and was last updated 8 years, 9 months ago by
Mike Edwards.
- AuthorPosts
- May 12, 2016 at 8:23 pm #44532
Mike Edwards
ParticipantI would like for everyone’s experience to be a good one this weekend so here are a couple reminders
1. Be polite to the staff working the race…..They have put in a lot of time to make this happen!
2. Read the rule book for your class, everything you need to know is on line!
3. Bring the required tools to tech, I will be the only one working tech and if I have to wait for someone to go get there tools it just slows the process down. Remember, I’m not there to work on your kart or loan tools! BTW If you don’t bring the correct tools to tech you may be fined or penalized…….I may set up a beer fund and that is where your fine money will go, and no that doesn’t mean you can come drink my beer!
Note: There are only a hand full of tools required to support what’s needed to be disassembled during your visit to tech. Those of you that have been there no what to expect. I will explain what’s need for those who don’t knoe during the drivers meeting.
Thanks for coming and remember to have fun!
Mike EdwardsMay 12, 2016 at 8:24 pm #67837Mike Edwards
Participantknow……………………..
May 12, 2016 at 9:08 pm #67838stacey cook
ParticipantThanks Mike Lets go have fun!
May 13, 2016 at 2:33 pm #67839Kirk Deason
ParticipantHey Mike, can I borrow your 13 mm? no no–just for a minute. CMON MAN!! Do you have an extra beer while I use your tools? Thanks-I’ll getcha back..sometime. ouch this is hot, hey Mike, can I use your gloves? Wait–i think I need a spring puller, Hey Mike, do you have one of those hook thingies?
May 13, 2016 at 8:38 pm #67840Mike Edwards
ParticipantThanks Kirk for owning “it” the exact problem I was talking about…….I didn’t want to name names but it was you that I was speaking to.
I’m proud of you!
Mike
May 14, 2016 at 2:13 pm #67841Mike Edwards
ParticipantJust kidding Kirk!……..
😛 - AuthorPosts
- You must be logged in to reply to this topic.