@Doug Welch wrote:
Another day, another up date. The only things I really need off the engine are the ignition coil, carb and radiator. Its easier to leave the carb with the kart than it is to leave it on the engine. Just remove the inlet fuel hose and lay the carb off to the side. The ignition system is two bolts and one disconnect on the back side of the engine. The radiator is two clamps and one bolt.
After a bit of arm twisting by the dealers, Rotax is waiving all fees for applying the dual seal. So both programs are a complete no cost to the racer. The only thing you have to lose is the time necessary to pull the motor and a can of carb cleaner so that we can crack it open.
There is no down side to racer.
Would this apply to a 2007 DD2 engine? :loco